GNN VIETNAM
PERFECT AUTOMATION SOLUTION
YÊU CẦU BÁO GIÁ
English Japan
Bảng giá Small Vacuum Pump Elements 800Series | SOLBERG

Bảng giá Small Vacuum Pump Elements 800Series | SOLBERG


  --  7/17/2013
Small Vacuum Pump Elements 10 - 640 m3/h Flow Range | SOLBERG | GNN VIETNAM

Features

  • Pleated media for high dirt holding capacity
  • Polyester : reinforced with epoxy coated steel wire on both sides of cloth, expanded metal I.D.
  • Paper : Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal O.D.
  • 40-50% increased dust loading capacity with prefilter (part number suffix P)
  • Optimal sealing surface & design 

Technical Specifications

  • Polyester : 99% + removal efficiency to 5 micron
  • Paper : 99% + removal efficiency to 2 micron
  • Temp (continuous): min -26°C (-15°F) max 104°C(220°F)
  • filter change out differential : 37-50 mbar over initial ? P 

Polyester Media Benefits

  • Washable with lukewarmwater & mild detergent
  • Less maintenane due to longer durability
  • Moisture resistant
  • Handles hot air and oil mist from unload cycle of reciprocating / puston compressor 

paper Media Benefits

  • Optimal surface area per given size
  • higher efficiency than many alternative media
  • Cost effective 

Addiional media Options

  • 1,4,25, and 100 micron Polyester
  • High temperature Nomex
  • Stainless steel Nomex reinforced by stainless steel wire mesh & expanded metal
  • Polypropylene
  • Activated carbon

Paper Replacement Elements-800 Series

Solberg Part Number Mann ref Number m³/h Rating Surface Area m² Dimensions-mm STD Endcap Features
ID OD HT
800 C31 10 0.013 10 29 30 GB
802 C31/1 10 0.02 10 29 38 GB
804 C32 20 0.033 10 29 62 GB
806 C42/1 15 0.031 13 38 38 GB
808 C42/2 10 0.017 13 38 29 GB
810 C43 25 0.051 13 38 62 GB
812 C44 15 0.031 13 38 38 GC
814 C64/1 25 0.051 17 59 40 GB
816 C64/3 25 0.051 17 59 40 GC
818 C66 35 0.083 17 59 62 GB
820 C66/1 35 0.071 17 59 52 GB
822 C74 15 0.027 25 68 27 TF1
824 C75 45 0.085 38 64 68 GC
826 C75/2 35 0.08 38 64 71 GCF
828 C76/2 25 0.045 38 64 44 GC
830 C79/1 45 0.085 25 64 73 GB
832 C79/2 35 0.076 38 64 68 GCF
834 C713 70 0.14 38 64 114 GBHF
836 C718 85 0.17 38 64 167 GBHF
838 C912 55 0.11 60 84 70 GCF
840 C1049 140 0.33 44 92 143 G
842 C1112 95 0.16 60 98 70 G
844 C1112/2 95 0.17 60 98 70 GCF
846 C1132 110 0.25 60 98 100 G
848 C1337 200 0.46 65 127 121 G
850 C15124/1 495 1.3 89 149 222 GR
852 C711/1 45 0.09 38 68 70 TC
854 C411 50 0.1 13 38 135 GB
856 C26240 640 1.6 195 254 195 T
858 C1574 190 0.12 89 149 124 G
862 C21138/1 550 1.3 144 213 164 T
868 N/A 45 0.093 60 94 75 M
870 C69/1 55 0.11 29 49 143 GB
872 C75/2 45 0.086 38 64 71 GBF
874 N/A - - 152 216 89 GCF
878 N/A 200 0.46 65 127 121 GB
896 N/A 200 0.49 60 101 214 GB

Polyester  Replacement  Elements—800  Series

Solberg Part Number Mann ref Number m³/h Rating Dimensions-mm STD Endcap Features
ID OD HT
825 C75 45 38 64 68 GC
827 C75/2 35 38 64 71 GCF
841 C1049 140 44 92 143 G
843 C1112 95 60 98 70 G
845 C1112/2 95 60 98 70 GCF
847 C1132 110 60 98 100 G
849 C1337 200 65 127 121 G
851 C15124/1 495 89 149 222 GR
857 C26240 640 195 254 195 T
859 C1574 190 89 149 124 G
863 C21138/1 550 144 213 164 T
879 N/A 200 65 127 121 GB
897 N/A 200 60 101 214 GB

Endcap Information

  • B  = Closed one end w/bolt hole
  • C  = Closed one end
  • F  = Felt gaskets on open end(s)
  • G  = Galvanized metal endcaps
  • H  = Felt gasket on bolt hole
  • I  = Injection molded santoprene
  • M = Molded plastisol
  • N  = Neoprene gaskets on endcaps
  • R  = Mixed Rubber/cork gasket EC’s
  • T  = Tin plated metal endcaps
  • 1  =1 gasket only

 
Số người xem : 8578
<< Trở về trang trước
Đăng ký nhận tin