| brand |
commodity |
| Pauly GmbH & Co. KG |
PP1037/2 /2PG11/k/fx/230VAC
Anti Collision Device
complete with reflector 7R50L and adjustment flange
JF152S , Relais constraint guided, with test
transmitter, steady light resistant up to 80kLux,
infrared transmitter, elastic soldered joint for
transformer |
| ZIEHL |
PTC-Relay
MSF 220 K
AC 220-240 V |
| ZIEHL |
PTC-Relay
MSF 220 K
AC/DC 24-240 V |
| SIEMENS |
UPS Siemens_A700
|
| KEB Antriebstechnik Vietnam |
09.F5.B1B-2B00 replaced by 09.F5.B1B-2B0A
KEB COMBIVERT type 09.F5.B1B-2B0A
Please note that this is the newer enhanced version (-2B0A instead of -2B00) with varnished boards as standard now. |
| KEB Antriebstechnik Vietnam |
09.F5.B1B-2B00 replaced by 09.F5.B1B-2B0A
KEB COMBIVERT type 09.F5.B1B-2B0A
Please note that this is the newer enhanced version (-2B0A instead of -2B00) with varnished boards as standard now. |
| CONCH Vietnam |
code TRA-4125
Conch Taiwan SCR
125A
3φ 3W (FULL) - AC 340 / 480V |
| Baumer Huebner |
HOG 71 DN 1024 TTL
Incremental Encoder Optical
- Hollow shaft Incremental Encoder
- A4, bore size 12H7, IP56
- Logic level: TTL (RS422)
- UB = +9... +30V
- Square wave outputs: K1, K1', K2,
K2', K0, K0'
- Inc./turn: Z = 1024
- Price is based on 1~4 pcs
- Compatible to serial no. 1622460
- I-no.: L70-73151A61024 |
| |
Ms. Anna |
| Techmach |
Model: US47, s/n: 01230032 replaced by US51 |
| LODIELE |
HV Fuse; XRNP 35KV; 0,5A / 50kA, size 25 x 460mm |
| MotoVario |
lion |
| MOOG Gemany |
MOD -072F522A-HP5
Type: S15KOFM4VBLN |
| MasterWatt |
MasterWatt
HEATER Type: 171Kw, 380v No.751417100000002
Material: Carbon steel (P275 NH UNI 10028-3)
Gasket material: ASBESTOS FREE
Suetion nozzle diameter /rating 10''/150#
Discharge nozzle diameter /rating 10''/150#
Nozzle Drain diameter /rating 1/2''/3000#NPT-PUGGED
Nozzle Vent diameter /rating 1/2''/3000#NPT-PUGGED
Installed power (N+ of bundlesxbundle power)
Electric feed - Voltage (V) 380+-10%-3ph. Cylce ( HZ) 50+-2%
Thermoelements required
Bundles protection No. 1 Item TE779
Type: (RTD 0 T/C-1,K..) Simple/double
Protection for electrical component IP-54 min
Proof execution Not Applicable
Heating elements number 54 (1)
Type: U,ECI 'U" (1)
Elements Drameter (mm) 16 (1)
Active lenght (mm) 4900 (1) |
| MasterWatt |
MasterWatt
HEATER Type: 171Kw, 380v No.751417100000002
Material: Carbon steel (P275 NH UNI 10028-3)
Gasket material: ASBESTOS FREE
Suetion nozzle diameter /rating 10''/150#
Discharge nozzle diameter /rating 10''/150#
Nozzle Drain diameter /rating 1/2''/3000#NPT-PUGGED
Nozzle Vent diameter /rating 1/2''/3000#NPT-PUGGED
Installed power (N+ of bundlesxbundle power)
Electric feed - Voltage (V) 380+-10%-3ph. Cylce ( HZ) 50+-2%
Thermoelements required
Bundles protection No. 1 Item TE779
Type: (RTD 0 T/C-1,K..) Simple/double
Protection for electrical component IP-54 min
Proof execution Not Applicable
Heating elements number 54 (1)
Type: U,ECI 'U" (1)
Elements Drameter (mm) 16 (1)
Active lenght (mm) 4900 (1) |
| SAGINOMIYA |
FQS-U30G
SAGINOMIYA Flow Switch. |
| Promixity switch |
XTFJ-R30M-10A2KA
|
| Gear Motor |
MBW40Y4(380V/50HZ)
Y series,
4KW, 4P
Gear Ratio：200-1000/rpm
Torgue≤32-64 Nm |
| Selet |
OCV81/DNNO |
| Promixity switch |
DFV100L4/BMG/HR/TI (To suit gear box K87)
35.08513251.02.0001.07.10
3kW ;out put speed : 1400rpm
B5 ( T .box:270 deg)/Brake Volt/Torque:380VAC/40Nm
220VACD/380VACY/50HZ/IP55/ClassF
|
| Gear Motor |
SDFT100LS8/2/BMQ
01.1193918702.0008.07
0.45/1.8kW; Out put speed : 630/2680rpm
16mm(pinion spigot)/160mm
B5/Brake Volt/Torque : 400VAC/20Nm
400VAC/50HZ/IP55/ClassF |
| Balluff Ger |
BTL5 -P1-M1400-P-63 replaced by BTL5-P1-M1400-P-S 32 |
| Balluff Ger |
BES 516-369-G-SA9-PU-2,5 |
| Balluff Ger |
BRGE1-WBA24-EP-PRK-2,5 |
| Balluff Ger |
BES M08MI-PSC20B-BV |
| |
Indent :
Items 1 & 3 : 4 - 6 wks
items 2 & 4 : 2 - 4 wks |
| |
The price based on the required quantitydemand. Only valid for
the orderquantity.
This offer not included any accessories
CO of Chamber of Origin Country 30USD
CQ of manufacturer for free
We pass on the expenses to our customers proportionately.
Charges for customs handling: Free/ per shipment
Payment in advance
Prices: ex works Ho Chi Minh City, Vietnam
Validity of our quotation: 30 days
About items is subject to prior sales. NOTE: we accept no payment by cheque!
We hope that our quotation induces you to place an order.
Should you require any further information, please do not
hesitate to contact me directly. |
| Vibration Motor |
Maker: Waagen-U (Herweg GMBH)
Vibration Motor 3,5kW/ 1420rpm / 230-400VAC, 50Hz
Type: KC8-500-4
Replaced by KBC8-500-4
|
| Sick Sensor |
DME3000-211
|
| Krones AG |
DIGITAL CONTACT GAUGE PM
Model: PM820110330 Krones
Sachnummer: 0-900 80-075-9
Nr. 7821895
3- digit 14mm LED display
1 contact output DC PNP
M12 plug 5 pins
dry ceramic sensor AL2O3 + Viton seal
80 mm stainless steel bayonet lock case
Pressure range: 0…10 bar gauge pressure
Process connection: ½” Gas B
Accuracy: +/- 0.5% f.s. |
| |
Extra costs for options: |
| |
- Second contact |
| |
- Analog output 4/20 mA |
| |
- Calibration report |
Trochoid Pump
Nippon Oil Pump (NOP) |
TOP-340 LEVB mã cũ được thay thế TOP-N340HVB
Model: TOP-N340HVB 1.0MPa (Bơm không có motor) |
| |
Power Siemens |
| |
Siemens MultiCounter 7KT1 352
S.N 9D2A1117 |
| Sakae Tsushin Kogyo |
46HD-10-2K |
| Sakae Tsushin Kogyo |
MF-46B thay tương đương MF20-46B6 |
| Saginomiya |
GMV-H1204G instead of GMV-H12046 |
| Saginomiya |
GMV-H1204G instead of GMV-H12046 |
| Saginomiya |
GMV-H1204G instead of GMV-H12046 |
| Turck |
Ni8-M18-AN6X |
| Baumer |
IFRM 03P1501/L
Inductive Sensor |
| Baumer |
IFRM 08P1707
Inductive Sensor |
| Baumer |
IFRM 05P15A1/L
Inductive Sensor |
| Baumer |
IFRM 04P15A1/L
Inductive Sensor |
| Kuebler |
Sendix Absolute Multiturn Encoder
8.F3663.4321.G222 |
| Fuji |
Fuji Panel Mount type pH Recorder and Controller
Model: EFR-4AC
Record range: 0 - 14 pH
Power source: AV100V or 200V (to be selected when ordering) |
| Bauer |
BS02- 37V/ P04 LA32-G/EMV
Replacement for E2-20/NUP432-170T-EMV |
| Vibration Motor |
KBC8-500-4 |
| Vibration Motor |
KBC5-500-4 |
| Opkon |
ELPM 300
LM=300mm,
Output 4-20mA or 0-20mA or 0-10V. (chon 0-20mA) |
| Opkon |
LPT 300
LM=300mm, Resistance = 10Kohm, Load Resistance = 100Kohm. |
| |
Giá này giảm 5% cho khách mua hàng |
| |
Giá hỗ trợ với số lượng: |
| |
3-5 pcs giảm 10% |
| |
6-10 pcs giảm 15% |
| |
Trên 10pcs giảm 20% |
| |
Mr. Hải |
| Balluff |
BTL5-E17-M0200-K-K02 |
| |
BTL5-E17-M0150-K-K02 |
| |
BTL5-E17-M0100-K-K02 |
| Flex-Core |
AFT-055E |
| MECO |
MECO Frequency Transducer (DIN Rail)
Model: FT
Range I/P: 45 – 65Hz @ 110V AC
Range O/P: 4 – 20mA DC For 45 - 65 Hz [Single Output]
Auxiliary Supply:
110V AC ± 20% @ 50Hz
Accuracy: ±0.5% of Span |
| GageMaker |
MT-3024F-50-USBC
MIC TRAC Base Unit w/ Desktop
Computer, MT-4-USB, and TF-1F-PL
Blocks, Internal- 0” to 24”, External- 1½” to 25½”
CAL-PAK Complete calibration package Includes: TF¬-1F, TF-IND, TF-DG, TF-CA, TF-SA, TF-TI, TF-SV, TF-SS, TF-VN, and storage case
TF-LG-2 Lead gage calibration fixture for either Allen or Gagemaker gages
TF-LG-3 Lead gage calibration fixture
TF-VB V block fixture for calibration of Gagemaker's TH-3004 and MRP-2002, Upper arms
TF-BA Base support block for setting dial bore gages
TF-BI Base support plate for setting dial bore gages
TF-IT Internal threaded ring ball P.D. module (for solid style rings)
TF-2V 6-20 pitch 60° “V” thread setting blocks
TF-MTL NO LONGER AVAILABLE
TF-.75T ¾” Taper Blocks, 8 & 10 Round, ¾” TPF Buttress, Line Pipe
TF-2.0RSC 2” Taper Blocks, 2.0 TPF Rotary Shouldered Connectors
TF-3.0RSC 3” Taper Blocks, 3.0 TPF Rotary Shouldered Connectors
Certificates:
- Inspection / Calibration report of Mictrac & TF-1F: Flat face setting block
- Certificate of Original – USA
- Certificate of Quantity
- Certificate of Warranty |
| GageMaker |
MT-3024F-50-USBC
MIC TRAC Base Unit w/ Desktop
Computer, MT-4-USB, and TF-1F-PL
Blocks, Internal- 0” to 24”, External- 1½” to 25½”
Certificates:
- Inspection / Calibration report of Mictrac & TF-1F: Flat face setting block
- Certificate of Original – USA
- Certificate of Quantity
- Certificate of Warranty |
| GageMaker |
MT-3024F-50-USBC
MIC TRAC Base Unit w/ Desktop
Computer, MT-4-USB, and TF-1F-PL
Blocks, Internal- 0” to 24”, External- 1½” to 25½”
Certificates:
- Inspection / Calibration report of Mictrac & TF-1F: Flat face setting block
- Certificate of Original – USA
- Certificate of Quantity
- Certificate of Warranty |
| MOOG Gemany |
J866-0002 |
| |
Giam max 200 |