| Name | Spec | Maker | 
        
            | I/P converter | instrument air   supply: 4-8 Barg; | Fisher | 
        
            |  | positioner: input signal: 4-20 mA,   Smart type; EEx-ia IIB T4, IP-65; c/w EEx-d | EU, G8, Singapore | 
        
            |  | brass cable gland 1/2" NPT with   PVC shroud for SWB cable entry; c/w gauges for |  | 
        
            |  | air supply; |  | 
        
            |  | c/w all necessary control accessories   (as filter/regulator, tubing fittings ... ) with |  | 
        
            |  | 316 SS materials; |  | 
        
            |  | air connection: 1/4" NPT-F; c/w   connector 1/4" NPT-F x 3/8 O.D. for air supply; |  | 
        
            | Control valve   6" | Basis for   calculation/selection: | Fisher | 
        
            | LCV-501 | Pipe size 8" 300# SCH.80; | EU, G8, Singapore | 
        
            |  | Service: oil; |  | 
        
            |  | Specific gravity: 0,85; |  | 
        
            |  | Viscosity: 0,7819 at 50°C&15,0   Barg; |  | 
        
            |  | Working temperature: 45°C; |  | 
        
            |  | Working pressure: 4-16 Barg; |  | 
        
            |  | Pressure drop: 1 Barg; |  | 
        
            |  | Max. pressure: 40 Barg; |  | 
        
            |  | Flow rate: 300-5000 m3/day; |  | 
        
            |  | Valve data: |  | 
        
            |  | Body material: ASTM A 216 WCB |  | 
        
            |  | Trim material: 316 SS at least; |  | 
        
            |  | Body style,: globe; |  | 
        
            |  | NACE MR 01 - 75 compliance; |  | 
        
            |  | % open: 20-80% of travel; |  | 
        
            |  | noise not exceed 83 dB (A); |  | 
        
            |  | actuator: pneumatic, fail close; |  | 
        
            |  | instrument air supply: 4-8 Barg; |  | 
        
            |  | flow characteristics: linear; |  | 
        
            |  | positioner: input signal: 4-20 mA,   Smart type; EEx-ia IIB T4, IP-65; c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT with PVC shroud   for SWB cable entry; c/w gauges for air supply; |  | 
        
            |  | the control circuit c/w suitable   EEx-d, IIB T4, IP-65 solenoid valve with nipple, EEx-d, IIB |  | 
        
            |  | T4, IP-65 junction box and brass   cable glands for on/off control from control room; |  | 
        
            |  | c/w all necessary control accessories   (as filter/regulator, tubing fittings ... ) with 316 SS |  | 
        
            |  | materials; |  | 
        
            |  | air connection: 1/4" NPT-F; c/w   connector 1/4" NPT-F x 3/8 O.D. for air supply; |  | 
        
            |  | c/w No 2 sets of opposite flanges 8   " 300#RF WN SCH.80, S.S./graphite spiral wound gask |  | 
        
            |  | all above control accessories shall   be assembed on the valve control panel; |  | 
        
            |  | environment: marine, tropical; |  | 
        
            |  | sizing calculation, full catalog,   data sheet, installation/hook-up documentation; |  | 
        
            |  | operator manual, ordering part number   list shall be submitted, spare actuators diaphragm. |  | 
        
            | level   transmitter | Displacer type; | Fisher | 
        
            | LT-501 | Service: waxy crude oil; | EU, G8, Singapore | 
        
            |  | Specific gravity: 0.85 |  | 
        
            |  | Pressure: 40 Barg max; |  | 
        
            |  | Temperature: 100 °C max; |  | 
        
            |  | Range / displacer length: 14"A |  | 
        
            |  | Output: 4-20 mA dc, Smart, direct -   increasing input increases output HART |  | 
        
            |  | Protocol ; |  | 
        
            |  | Input: liquid level; |  | 
        
            |  | Supply: 24 V DC; |  | 
        
            |  | Accuracy: 0.5% of full scale output; |  | 
        
            |  | Case type: rotary; |  | 
        
            |  | Float material: 316 SS; |  | 
        
            |  | Trim material: 316 SS; |  | 
        
            |  | Body material: carbon steel; |  | 
        
            |  | Housing: EEx-ia IIB T4 IP-65; |  | 
        
            |  | Caged sensor connection style: upper   and lower side connection, RF flanged I", |  | 
        
            |  | 300#; |  | 
        
            |  | C/w No 2 ball valves 1" 300# RF   flanged, No 2 opposite flanges WN 1" 300# RF |  | 
        
            |  | and No 4 sets of spiral wound   gaskets, bolts and nuts; |  | 
        
            |  | Cage drain: 3/4" NPT-F, c/w   reducing nipple 3/4" x 1/2" Sch.80 NPT-M, 316 SS |  | 
        
            |  | ball valve 1/2" 800# NPT-F/F,   316 SS straight male connector 1/2" NPT-Mx3/8" |  | 
        
            |  | OD and tubing plug 3/8"; |  | 
        
            |  | Standard cage, head, and torque tube   arm material: 316 SS; |  | 
        
            |  | Local indicator: Yes; |  | 
        
            |  | Electrical connection:   1/2"NPT-F, standard terminal block, c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT-M, earth lug for   12- 18mm OD SWB cable entry and PVC shroud; |  | 
        
            |  | Suitable for marine tropical   environment, ambient temperature 40C max, humidity |  | 
        
            |  | C/w full catalog, test certificate ,   test certificate including installation / hook-up inst |  | 
        
            |  | /drawing, operator manual, ordering   part number list. |  | 
        
            | Control valve | Basis for   calculation/selection: | Fisher | 
        
            | PCV-521 | Pipe size 4" 150# SCH.80; | EU, G8, Singapore | 
        
            |  | Service: natural gas |  | 
        
            |  | molecular mass: 23,00; |  | 
        
            |  | density: 0,95 Kg/ m3 at 20oC&1,0   Barg; |  | 
        
            |  | Working temperature: 45°C; |  | 
        
            |  | Working pressure: 8 l3arg; |  | 
        
            |  | Pressure drop: 1 Barg; |  | 
        
            |  | Max. pressure: 10 Barg; |  | 
        
            |  | Specific gravity :0,84; |  | 
        
            |  | Flow rate: 10000-115000 m3/day; |  | 
        
            |  | Valve data: |  | 
        
            |  | Body material: ASTM A 216 WCB |  | 
        
            |  | Trim material: 316 SS at least; |  | 
        
            |  | Body style,: globe; |  | 
        
            |  | NACE MR 01 - 75 compliance; |  | 
        
            |  | % open: 20-80% of travel; |  | 
        
            |  | noise not exceed 83 dB (A); |  | 
        
            |  | actuator: pneumatic, fail close; |  | 
        
            |  | instrument air supply: 4-8 Barg; |  | 
        
            |  | flow characteristics: linear; |  | 
        
            |  | positioner: input signal: 4-20 mA,   Smart type; EEx-ia JIB T4, IP-65; c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT with PVC shroud   for SWB cable entry; c/w gauges for air supply; |  | 
        
            |  | c/w all necessary control accessories   (as filter/regulator, tubing fittings ... ) with 316 SS |  | 
        
            |  | materials; |  | 
        
            |  | air connection: 1/4" NPT-F; c/w   connector 1/4" NPT-F x 3/8 O.D. for air supply; |  | 
        
            |  | c/w No 2 sets of opposite flanges 4   " 150#RF WN SCH.80, S.S./graphite spiral wound |  | 
        
            |  | gaskets, bolts/nuts suitable; |  | 
        
            |  | all above control accessories shall   be assembed on the valve control panel; |  | 
        
            |  | environment: marine, tropical; |  | 
        
            |  | sizing calculation, full catalog,   data sheet, installation/hook-up documentation; |  | 
        
            |  | operator manual, ordering part number   list shall be submitted, spare actuators diaphragm. |  | 
        
            | Control valve | Basis for   calculation/selection: | Fisher | 
        
            | LCV-521 | Pipe size 4" 600# SCH.80; | EU, G8, Singapore | 
        
            |  | Service: oil; |  | 
        
            |  | Specific gravity: 0,85; |  | 
        
            |  | Viscosity: 0,7819 at 50°C&15,0   Barg; |  | 
        
            |  | Working temperature: 45°C; |  | 
        
            |  | Working pressure: 40 Barg; |  | 
        
            |  | Pressure drop: I Barg; |  | 
        
            |  | Max. pressure: 60 Barg; |  | 
        
            |  | Flow rate: 12-100 m3/hr; |  | 
        
            |  | Valve data: |  | 
        
            |  | Body material: ASTM A 216 WCB |  | 
        
            |  | Trim material: 316 SS at least; |  | 
        
            |  | Body style,: globe; |  | 
        
            |  | NACE MR O 1 - 75 compliance; |  | 
        
            |  | % open: 20-80% of travel; |  | 
        
            |  | noise not exceed 83 dB (A); |  | 
        
            |  | actuator: pneumatic, fail close; |  | 
        
            |  | instrument air supply: 4-8 Barg; |  | 
        
            |  | fow characteristics: linear; |  | 
        
            |  | positioner: input signal: 4-20 mA,   Smart type; EEx-ia IIB T4, IP-65; c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT with PVC shroud   for SWB cable entry; c/w gauges for air supply; |  | 
        
            |  | the control circuit c/w suitable   EEx-d, JIB T4, IP-65 solenoid valve with nipple, EEx-d, IIB |  | 
        
            |  | T4, IP-65 junction box and brass   cable glands for on/off control from control room; |  | 
        
            |  | c/w all necessary control accessories   (as filter/regulator, tubing fittings ... ) with 316 SS |  | 
        
            |  | materials; |  | 
        
            |  | air connection: 1/4" NPT-F; c/w   connector 1/4" NPT-F x 3/8 O.D. for air supply; |  | 
        
            |  | c/w No 2 sets of opposite flanges 4   " 600#RF WN SCH.80, S.S./graphite spiral wound Bask |  | 
        
            |  | all above control accessories shall   be assembed on the valve control panel; |  | 
        
            |  | environment: marine, tropical; |  | 
        
            |  | sizing calculation, full catalog,   data sheet, installation/hook-up documentation; |  | 
        
            |  | operator manual, ordering part number   list shall be submitted, spare actuators diaphragm. |  | 
        
            | level   transmitter | Displacer type; | Fisher | 
        
            | LT-521 | Service: water/grude oil; | EU, G8, Singapore | 
        
            |  | Specific oil gravity: 0.85, specific   water gravity 1.01 |  | 
        
            |  | Pressure: 10 Barg max; |  | 
        
            |  | Temperature: 100 °C max; |  | 
        
            |  | Range / displacer length: 32"; |  | 
        
            |  | Output: 4-20 mA dc, Smart, direct -   increasing input increases output HART |  | 
        
            |  | Protocol ; |  | 
        
            |  | Input: liquid level; |  | 
        
            |  | Supply: 24 V DC; |  | 
        
            |  | Accuracy: 0.5% of full scale output; |  | 
        
            |  | Case type: rotary; |  | 
        
            |  | Float material: 316 SS; |  | 
        
            |  | Trim material: 316 SS; |  | 
        
            |  | Body material: carbon steel; |  | 
        
            |  | Housing: EEx-ia IIB T4 IP-65; |  | 
        
            |  | Caged sensor connection style: upper   and lower side connection, RF flanged I", |  | 
        
            |  | 300#; |  | 
        
            |  | C/w No 2 ball valves 1" 300# RF   flanged, No 2 opposite flanges WN I" 300# RF |  | 
        
            |  | and No 4 sets of spiral wound   gaskets, bolts and nuts; |  | 
        
            |  | Cage drain: 3/4" NPT-F, c/w   reducing nipple 3/4" x 1/2" Sch.80 NPT-M, 316 SS |  | 
        
            |  | ball valve 1/2" 800# NPT-F/F,   316 SS straight male connector 1/2" NPT-Mx3/8" |  | 
        
            |  | OD and tubing plug 3/8"; |  | 
        
            |  | Standard cage, head, and torque tube   arm material: 316 SS; |  | 
        
            |  | Local indicator: Yes; |  | 
        
            |  | Electrical connection:   1/2"NPT-F, standard terminal block, c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT-M, earth lug for   12- 18mm OD SWB cable entry and PVC shroud; |  | 
        
            |  | Suitable for marine tropical   environment, ambient temperature 40C max, humidity |  | 
        
            |  | C/w full catalog, test certificate ,   test certificate including installation / hook-up inst |  | 
        
            |  | /drawing, operator manual, ordering   part number list. |  | 
        
            | Control valve   3" | Basis for   calculation/selection: | Fisher | 
        
            | LCV-562 | Pipe size 3" 300# SCH.40; | EU, G8, Singapore | 
        
            |  | Service: oil; |  | 
        
            |  | Specific gravity: 0,85; |  | 
        
            |  | Viscosity: 0,7819 at 50°C&15,O   Barg; |  | 
        
            |  | Working temperature: 45°C; |  | 
        
            |  | Working pressure: 6-16 Barg; |  | 
        
            |  | Pressure drop: 1 Barg; |  | 
        
            |  | Max. pressure: 40 Barg; |  | 
        
            |  | Flow rate: 120-1500 m3/day; |  | 
        
            |  | Valve data: |  | 
        
            |  | Body material: ASTM A 216 WCB |  | 
        
            |  | Trim material: 316 SS at least; |  | 
        
            |  | Body style,: globe; |  | 
        
            |  | NACE MR 01 - 75 compliance; |  | 
        
            |  | % open: 20-80% of travel; |  | 
        
            |  | noise not exceed 83 dB (A); |  | 
        
            |  | actuator: pneumatic, fail close; |  | 
        
            |  | instrument air supply: 4-8 Barg; |  | 
        
            |  | flow characteristics: linear; |  | 
        
            |  | positioner: input signal: 4-20 mA,   Smart type; EEx-ia JIB T4, IP-65; c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT with PVC shroud   for SWB cable entry; c/w gauges for air supply; |  | 
        
            |  | the control circuit c/w suitable   EEx-d, IIB T4, IP-65 solenoid valve with nipple, EEx-d, IIB |  | 
        
            |  | T4, IP-65 junction box and brass   cable glands for on/off control from control room; |  | 
        
            |  | c/w all necessary control accessories   (as filter/regulator, tubing fittings ... ) with 316 SS |  | 
        
            |  | materials; |  | 
        
            |  | air connection: 1/4" NPT-F; c/w   connector 1/4" NPT-F x 3/8 O.D. for air supply; |  | 
        
            |  | c/w No 2 sets of opposite flanges 3   " 300#RF WN SCH.40, S.S./graphite spiral wound gask |  | 
        
            |  | all above control accessories shall   be assembed on the valve control panel; |  | 
        
            |  | environment: marine, tropical; |  | 
        
            |  | sizing calculation, full catalog,   data sheet, installation/hook-up documentation; |  | 
        
            |  | operator manual, ordering part number   list shall be submitted, spare actuators diaphragm. |  | 
        
            | Control valve   4" | Pipe size 6"   300# SCH.40; | Fisher | 
        
            | PCV-561 | Service: natural gas | EU, G8, Singapore | 
        
            |  | molecular mass: 23,00; |  | 
        
            |  | density: 0,95 Kg/ m3 at 20oC&1,0   Barg; |  | 
        
            |  | Working temperature: 100°C; |  | 
        
            |  | Working pressure: 6-16 Barg; |  | 
        
            |  | Pressure drop: 1 Barg; |  | 
        
            |  | Max. pressure: 40 Barg; |  | 
        
            |  | Flow rate: 2500-90000 m3/day; |  | 
        
            |  | Valve data: |  | 
        
            |  | Body material: ASTM A 216 WCB |  | 
        
            |  | Trim material: 316 SS at least; |  | 
        
            |  | Body style,: globe; |  | 
        
            |  | NACE MR 01 - 75 compliance; |  | 
        
            |  | % open: 20-80% of travel; |  | 
        
            |  | noise not exceed 83 dB (A); |  | 
        
            |  | actuator: pneumatic, fail close; |  | 
        
            |  | instrument air supply: 4-8 Barg; |  | 
        
            |  | flow characteristics: linear; |  | 
        
            |  | positioner: input signal: 4-20 mA,   Smart type; EEx-ia IIB T4, IP-65; c/w EEx-d |  | 
        
            |  | brass cable gland 1/2" NPT with   PVC shroud for SWB cable entry; c/w gauges for |  | 
        
            |  | air supply; |  | 
        
            |  | c/w all necessary control accessories   (as filter/regulator, tubing fittings ... ) with |  | 
        
            |  | 316 SS materials; |  | 
        
            |  | air connection: 1/4" NPT-F; c/w   connector 1/4" NPT-F x 3/8 O.D. for air supply; |  | 
        
            |  | c/w No 2 sets of opposite flanges 6   " 300# RF WN SCH.40, S.S./graphite spiral |  | 
        
            |  | wound gaskets, bolts/nuts suitable; |  | 
        
            |  | all above control accessories shall   be assembed on the valve control panel; |  | 
        
            |  | environment: marine, tropical; |  | 
        
            |  | sizing calculation, full catalog,   data sheet, installation/hook-up documentation; |  | 
        
            |  | operator manual, ordering part number   list shall be submitted, spare actuators diapb |  | 
        
            | Level | Displacer type; | Fisher | 
        
            | Transmitter | Service: water/grude oil; | EU, G8, Singapore | 
        
            | LT-562 | Specific oil gravity: 0.85, specific   water gravity 1.01 |  | 
        
            |  | Pressure: 40 Barg max; |  | 
        
            |  | Temperature: 100 °C max; |  | 
        
            |  | Range / displacer length: 40"; |  | 
        
            |  | Output: 4-20 mA dc, Smart, direct -   increasing input increases output HART |  | 
        
            |  | Protocol ; |  | 
        
            |  | Input: liquid level; |  | 
        
            |  | Supply: 24 V DC; |  | 
        
            |  | Accuracy: 0.5% of full scale output; |  | 
        
            |  | Case type: rotary; |  | 
        
            |  | Float material: 316 SS; |  | 
        
            |  | Trim material: 316 SS; |  | 
        
            |  | Body material: carbon steel; |  | 
        
            |  | Housing: EEx-ia IIB T4 IP-65; |  | 
        
            |  | Caged sensor connection style: upper   and lower side connection, RF flanged 1 ", |  | 
        
            |  | 300#; |  | 
        
            |  | C/w No 2 ball valves 1" 300# RF   flanged, No 2 opposite flanges WN I" 300# RF |  | 
        
            |  | and No 4 sets of spiral wound   gaskets, bolts and nuts; |  | 
        
            |  | Cage drain: 3/4" NPT-F, c/w   reducing nipple 3/4" x 1/2" Sch.80 NPT-M, 316 SS |  | 
        
            |  | ball valve 1/2" 800# NPT-F/F,   316 SS straight male connector 1/2" NPT-Mx3/8" |  | 
        
            |  | OD and tubing plug 3/8"; |  | 
        
            |  | Standard cage, head, and torque tube   arm material: 316 SS; |  | 
        
            |  | Local indicator: Yes; |  | 
        
            |  | Electrical connection:   1/2"NPT-F, standard terminal block, c/w EEx-d brass cable |  | 
        
            |  | gland 1/2" NPT-M, earth lug for   12- 18rmn OD SWB cable entry and PVC shroud; |  | 
        
            |  | Suitable for marine tropical   environment, ambient temperature 40C max, humidity |  | 
        
            |  | C/w full catalog, test certificate ,   test certificate including installation / hook-up inst |  | 
        
            |  | /drawing, operator manual, ordering   part number list. |  |