| Brand |
Code |
| Nissei Vietnam |
Correct: FSM-25-240-T010WA
FSM-25- R240-T010WA |
| Nissei Vietnam |
Correct: FSM-30-240-T020WA
FSM-30-R240-T020WA |
| Nissei Vietnam |
FFM-45-R1200-T020WA
Please confirm with catalog file attach |
| |
|
| Nissei Vietnam |
Correct: FSW-35-5-T040E
Gear motor FSW-35-5-T040E-TETA2 |
| |
|
| Kinetek Vietnam |
Replaced by: ZXK-CAN3000
WP-CAN-2100 |
| Kinetek Vietnam |
Replaced by: Car Control Board (ZXK-CAN 01D)
WP-CAN-01 C |
| Kinetek Vietnam |
Replaced by: Car Instruction I/O Board (ZXK-CAN 02D)
WP-CAN-02 |
| Kinetek Vietnam |
Replaced by: Car PI Indicator - dot matrix (ZXK-CAN 03C)
WP-CAN-03 |
| Kinetek Vietnam |
Replaced by: Landing PI Indicator - dot matrix (ZXK-CAN 03C)
WP-CAN-03 |
| |
|
| IFM Vietnam |
SI 2200 |
| IFM Vietnam |
SI 5000 |
| |
|
| Detas Vietnam |
0160002305
GSA SWD05/24
100-240VAC/24VDC 5A
(Power supply GSA-SWD 05-24FSA
INPUT: 100-120VAC/200-240VAC 50-60Hz
OUTPUT: 24VDC 5A") |
| |
|
| Dynapar Vietnam |
11BRW-300-B10 |
| |
|
| Fanuc Vietnam |
A860-2120-T451 |
| Fanuc Vietnam |
SR220H017M
PLEASE GIVE A DESCRIPTION AS CAN NOT FIND ANY INFORMATION BASED ON THE NUMBERS GIVEN. |
| Fanuc Vietnam |
SR280H013M
PLEASE GIVE A DESCRIPTION AS CAN NOT FIND ANY INFORMATION BASED ON THE NUMBERS GIVEN. |
| SMC Vietnam |
D-C73L= D-C73 + 3 metres wire
D-C73 |
| SMC Vietnam |
D-B54L= D-C54 + 3 metres wire
D-B54 |
| |
|
| Wachendorff Vietnam |
WDG 58B-5000-AB-H24-SC4
WDG58-5000-AB-h24-SC4 |
| |
|
| Kubler Vietnam |
8.5802 1272 0360
10-30 dc…….ma 78 24 volt supply
Serial no: 0103075870 |
| |
|
| Carlo Gavazzi Vietnam |
(Photocell + Reflector (PMP12RS + ER4)
PMP12RS1624 |
| Carlo Gavazzi Vietnam |
PMT20RG |
| |
|
| Bihl + Wiedemann Vietnam |
BW1345
AS-i Analog Input Module 0-10 V/4-20 mA,
2 channels, IP20.
(BWU1345
IDENT No: 11832)
BW1345 = BWU1345. |
| Bihl + Wiedemann Vietnam |
BW1412
AS-i Analog Output Module 0-10 V/4-20 mA
2 channels, IP20.
(BWU1412
IDENT No: 11219)
BW1412 = BWU1412. |
| Bihl + Wiedemann Vietnam |
BW1703
AS-i 3.0 PROFIBUS DP Gateway in
Stainless Steel, 2 Masters.
(BWU1703)
BW1703 = BWU1703. |
| Bihl + Wiedemann Vietnam |
BW1702
AS-i 3.0 PROFIBUS DP Gateway in
Stainless Steel, 1 Master.
(BWU1702)
BW1702 = BWU1702. |
| |
|
| Ebara Vietnam |
64 BHE 44-3 |
| Spco Vietnam |
UG46-3 (UGM4/7.5)
Q= 50m3/h; H=15m
5.5kw - Franklin |
| |
|
| ETI Vietnam |
Code: 004255012
Fuse ETI 24 kV/50A/50kA
(length of fuse unit is 442mm);
(Fuse ETI 24 kV/50A/125 Ka) |
| ETI Vietnam |
Code: 004255003
Fuse ETI 24V/2A/50kA;
(length of fuse unit is 442mm);
(25 kV/2A/50 kA) |
| ETI Vietnam |
Replaced by: 24kV/2A with code 004255003
(length of fuse unit is 442mm)
(XRNP-24 kV/1A) |
| |
|
| Dropsa Vietnam |
Manual pump 156070 |
| |
|
| Baumer Vietnam |
Inductive sensor IFRM 08P37A1/S35L
Item no. 10141536 |
| |
|
| Siemens Vietnam |
6SE6440-2UD34-5FA1 |
| Siemens Vietnam |
6SE6440-2UD37-5FA1 |
| |
|
| Idinsertdeal Vietnam |
Regolatore R123 LL
R123 1" GF, 30 bar, 0.8 - 8 bar, NBR, ID ## 07 N2 Azoto
pressure regulator type R123C2
medium: gas nitrogen
system: no relieving
material of construction: body and bonnet of aluminium, diaph. and O-ring of
NBR
Pin: max. 30 bar
Pout: 0.8 - 8 bar - gauge scale 0-16 bar included
inlet / outlet connection: 1" BSP-F
(R 123 C2) |
| Idinsertdeal Vietnam |
Regolatore R180 IN LL
E/U 1"GF, PE 6 bar, MOD A PU 20+50mbar, NBR, ID ## 07 N2 Azoto
pressure regulator type R180A
same characteristics as above except :
Pin: max. 6 bar
Pout: 20 - 50 mbar
gauge not included, connection for outlet gauge 1/4" BSP-F
(R 180 A) |
| |
|
| Oriental Vietnam |
SG8030J-D
Controller for Stepping Motor, 24VDC, DIN Rail Mounting Model |
| Oriental Vietnam |
SG8030J-U
Controller for Stepping Motor, 24VDC, Recessed Mounting Model. |
| |
|
| Oriental Vietnam |
5GN90KA
Gearhead Frame Size 90mm, GN Pinion, Gear Ratio 1:90. |
| Oriental Vietnam |
5GU10XK
Gearhead Frame Size 90mm, GU Pinion, Decimal Gearhead, Ball Bearing Type. |
| |
|
| Vaisala Vietnam |
HMT330 3G0A101BCAC100A1CAABAA1
- Temperature? -40-80°C
- To measure the ambient RH + T
- Humidity: 30-100%RH (If the humidity in the tank will rise to 100 % RH, I would recommend the HMT337 with heated humidity probe to eliminate sensor condensation.
If the hudmity will stay below 90 % RH at all times, we can consider the HMT333 is suitable).
HMT330 - 3G0A011BCAC100A1AAABAA1 |
| |
|
| Vaisala Vietnam |
GMM221 L0N0A1A0B1B
GMM221L0N0A1A0B
Control Temperature: 35.0 - 39.0 oC, sensor Pt 100
Control CO2: 4.0% - 7.0 CO2, used with GMM220 Carbon dioxide module |
| |
|
| Homa Vietnam |
Solid state control unit Teil-Nr : 4400E |
| |
|
| AERZEN Vietnam |
Air Filter element AERZENER:
P/N: 175241
175241000 |