1948
Moritz Kurt Juchheim founds the company M. K. JUCHHEIM, better known as JUMO GmbH & Co. KG (derived from the founder's name), in Fulda, Germany. He started manufacturing glass thermometers and glass contact thermometers with six employees in a 350 m² production area. He was born on July 4, 1910 in Ilmenau, Thuringia, Germany, where his father already manufactured thermometers.
Right from the start, Moritz Kurt Juchheim's philosophy was to manufacture high-quality precision instruments and to offer the best possible service.
1949
-
The wire goods factory is acquired to manufacture protection fittings for glass thermometers.
-
A turnery is opened.
-
The company participates in the Hannover-Messe trade show for the first time.
1950 - 1959
-
A national distribution network is established.
1951: First patent for the development of a glass contact thermometer.
1952: For the first time, JUMO has over 100 employees.
1960 - 1969
-
the first branches are established in Germany.
1960: 750 JUMO employees work in a production area of 20,000m².
1961: The first laboratories for material testing are established.
1970 - 1979
-
Expansion continues with both ongoing and new development of electronic temperature controllers, recorders, and programmers as well as transmitters.
1970: JUMO employs almost 1,000 employees at the Fulda location.
1978: JUMO is one of the first companies to invest in processors for control technology by using microprocessor technology in JUMO devices and by developing the software required for this.
1979: Initial production of electronic pressure measuring devices, the field of pressure measuring is established.
1980 - 1989
-
The introduction of industrial robots considerably increases production efficiency.
-
Global expansion progresses thanks to the foundation of further subsidiaries.
1980: For the first time, JUMO also offers external customers comprehensive services in the fields of metal processing and electronic modules.
1981: Measuring and calibration possibilities for air humidity sensors are expanded.
1982: The field of analytical measurement is established: Production is expanded to cover measuring and control devices to determine chemical process variables.
1984: A clean room is established for the "temperature sensor" area to enable production under special environmental conditions.
1985: Dipl.-Ing. Bernhard Juchheim takes over management of M. K. JUCHHEIM GmbH & Co. after the death of his eldest brother, Peter Juchheim. Bernhard, the youngest son of Moritz Kurt Juchheim was born on December 24, 1949.
1987: With the introduction of SMD technology (Surface Mounted Device) and investments in the assembling machines required for this, complex printed boards for JUMO products can now be manufactured in-house.
1988: An EMC laboratory (electro-magnetic compatibility) is constructed.
The state-approved testing agency for heat energy begins operation.
1989: JUMO introduces robots in temperature sensor manufacturing, making them a market pioneer.
1990-1999
-
Dynamic global growth through the development of high-tech instruments, process control systems, smart transmitters, bus technology, state-of-the-art visualization software, for example.
1991: The Development Department moves into a new building.
The company is certified according to DIN EN ISO 9001.
1992: A certified DKD laboratory (German calibration service) opens on site at JUMO.
1994: The new PPS production planning system is commissioned.
1995: The JUMO training center opens.
1996: Company founder Moritz Kurt Juchheim dies on November 2, 1996 in Fulda. He played an active role in managing the company right up to his death.
1999: The company is certified according to DIN EN ISO 14001 (environmental certification).
2000-2009
-
JUMO steadily expands its international reach and invests in the Asian and Eastern European growth markets.
-
Complete automation systems tap into new target groups.
2000: JUMO generates over 100 million euros in revenue for the first time.
2002: The new sales and production building for the temperature sensor technology product line – with a total area of 4,680 m² – opens in the Eisweiher industrial park.
2003: The JUMO trade name has achieved outstanding international significance in the field of metrology, control engineering, and automation technology in recent decades. As result, it was decided to adapt the formal company name in Germany in line with the international name. In June M. K. JUCHHEIM GmbH & Co was renamed to JUMO GmbH & Co. KG. Dipl.-Kfm. Michael Juchheim was appointed managing director in addition to his father Bernhard Juchheim.
2005: A new logistics center is commissioned, with a finished-goods store, order picking and packing. Automatic warehousing technology, a barcode-controlled handling system, as well as a newly set up dispatch ramp all ensure fast and reliable shipment.
A new IT center is created to ensure that all DP-controlled process flows are optimized and secure.
Innovative products with a certified functional reliability according to DIN EN 61 508 are launched to minimize process and user risks.
2007: In honor of the company’s founder, Moritz Kurt Juchheim, the access road to JUMO's headquarters in Fulda is renamed to Moritz-Juchheim-Straße.
JUMO introduces devices with wireless measured value transmission to the market, giving customers access to completely new applications. For example, the wireless technology enables temperature measurement in areas which are difficult to access. Expensive special cables and time-intensive cabling are no longer necessary.
2008: A clean room is created for the pressure measurement technology production area to fulfill the particular production requirements for the sensitive devices.
JUMO once again offers training to become a glass equipment maker. The hand blown products are mainly used in electrodes for liquid analyses.
2010-2014
2011: JUMO receives the "customs simplifications, security and safety" AEO certificate (AEO F) and is thus considered a particularly trustworthy and reliable supplier for international trading of goods. The AEO F certification is the highest internationally recognized seal of quality that can be awarded by customs authorities.
JUMO's DKD laboratory (German calibration service) receives certification from the new Deutsche Akkreditierungsstelle GmbH, DAkkS (German Accreditation Body).
Consolidated company revenue exceeds 200 million euros for the first time.
2012: The newly constructed incoming goods and logistics center opens in Fulda.
The JUMO corporate group has over 2,000 employees.
2013: JUMO successfully completes certification as an officially authorized and recognized shipper of air freight.
In November, JUMO sets the course for further growth at the Fulda location and purchases 100,000 m² of land. A completely new factory for sensor manufacturing will be built here in the next few years.
2014: JUMO is included in the FOCUS magazine list, "Deutschlands beste Arbeitgeber" (Germany's Best Employers).
JUMO is awarded the title of "Wachstums-Champion 2014" (Growth Champion 2014) for above-average growth and a solution-oriented business model over the course of several years.
JUMO is honored for participating in the Hannover-Messe trade show 65 times.
The "Fachkraft für Metalltechnik" (metal technology specialist) training program begins as a new, two-year apprenticeship trade, specifically designed to give Hauptschule (secondary general school) pupils opportunities at JUMO.
Product List
· Temperature
o RTD temperature probe
§ Accessories
§ as per features
· with display
· with connecting cable
· with terminal head
· with connector
· with process connection
· without process connection
· for wall and channel mounting
· with transmitter
· with radio transmission (wireless)
· for pipe mounting
· with CANopen output
§ as per characteristics
· impact-proof
· steam-tight
· flexible
· waterproof
§ as per application
· Building management
· Drinks
· Compressors
· Plastic
· Utility vehicles
· Pharma
· process industry (chemistry)
· solar
· Sterilizer
· Heat meter
· Meat processing
§ as per approvals
· MID,PTB
· ATEX
· EHEDG
· DIN EN 14 597
· GL
· GOST
· IC
· FCC
· UL
o Platinum temperature sensors
§ Wire
§ Thin-layer
o Thermocouple
§ as per features
· with compensating cable
· with terminal head
· with connector
· with process connection
· without process connection
· with transmitter
§ as per characteristics
· impact-proof
· flexible
· waterproof
· steam-tight
§ as per application
· plastic
· Hot channel
· Furnace
· Meat processing
§ as per approvals
· DIN EN 14 597
· GOST
o equipment/calibration service
o Transmitter
o Controllers (electronic)
§ 1-channel controller
§ Multi-channel controller
§ program controller
§ as per features
· Controller type
o 2-state/3-state
o 2-state modulating
o continuous controller
o Cascade controller
o Ratio/differential value controller
· Controller format
o 48 x 24 mm
o 48 x 48 mm
o 48 x 96 mm (upright format)
o 48 x 96 mm (upright format)
o 96 x 96 mm
· with interface
o Modbus RS422/485
o PROFIBUS-DP
· extendable by modules
o Controllers (electromechanical)
§ Panel-mounting Thermostats
§ Surface-mounting Thermostats
§ Room thermostat
§ Contact Dial Thermometer
o Thermostats/Switch
§ Electronic
· Microstat
· Temperature switch
· Thermostats
§ Electromechanical
· Temperature switch
· Panel-mounting Thermostats
· Surface-mounting Thermostats
· Room thermostat
· Contact Dial Thermometer
· Microstat
· Frost protection thermostat
o Monitor/Limiter
§ Electronic
§ Electromechanical
o Indicators
o Paperless recorder
o Chart recorder
o Power units
o Measuring, control and automation system
· Liquid analysis
o Ammonia
§ Sensor
§ Transmitter/controller
o Chlorine dioxide
§ Measuring cells
§ Transmitter/controller
§ Fittings
o Concentration
§ Azotic acid (transmitter)
§ Caustic soda solution (transmitter)
§ Transmitter/controller
o Conductivity
§ Measuring cells/Sensors
§ Transmitter/controller
§ Portable measuring device
· Pressure
· Level
· Flow
o Flow measuring devices
o Controller
o Indicators
o paperless recorder
· Control
· Automation
o Displaying
o Evaluating/visualizing
o Electronic Assemblies
o Power units
o System technology
o Transmitter
o Measuring, control and automation system
· Monitoring