PERFECT AUTOMATION SOLUTION
English Japan
Connectwell Industry

Connectwell Industry


  --  11/2/2009
Established in 1978, Connectwell is one of the leading manufacturers of Terminal Blocks.

Established in 1978,  Connectwell    is  one  of  the  leading  manufacturers  of

Terminal Blocks.

 

Connectwell over the years has undergone  constant evolution  of  infrastructure,

systems and personnel.  This evolution  is  exemplified by its  high quality products.

 

Connectwell’s  product  range  has increased  from  a  single feed through Terminal

Block to hundreds of variants of  Terminal Blocks with complex functionalities and a

wide range of Interface Modules.

 

Reputed  approvals and  certifications like   UL, CSA,  VDE,  SEMKO,  TUV  and  CE

verify the levels of quality that can be expected from Connectwell Products.

 
 
 

Twenty Seven Years  of  incessant  dedication  and  commitment have made         

Connectwell  a synonym for …The Right Connection.    

Product's Category :

Terminal Blocks
  
Polyamide Series    Screw Clamp     Single Level
    
Multiple Connection
    
Double Level
    
Triple Level
    
Triple Level with Ground
    
Distribution Blocks
    
Compact Distribution Blocks
    
High Voltage Terminal Blocks
    
Spring Loaded Terminal Blocks
    
Micro
    
Modular Panel Mount
    
Single Level Fuse
    
Double Level Fuse
    
Disconnect & Test
    
Thermocouple
    
Earthing
    
Neutral/Earth Clamp
    
Corrosive/Explosive Env.
   Spring Clamp
    1-in 1-Out
    
Multiple Connection
    
Grounding
    
Panel Mount
    
Angular feed through
    
Anguler Earthing
    
Double Level
    
Anguler Fuse
    
Disconnect & Test Terminal Blocks
    
Diode / Resistor Terminal Blocks
   Active
    Diode/Resistor
    
Indication
    
Surge Supression
   Tab/Clip    Stud Type    Hinge Type Stud    Power Terminal Blocks
 
 
High Temperature      Screw Clamp
    
Stud Type
    
Safety Connection
    
Bus Bar Type
    
Disconnect & Test
    
Multiway Strip
    
Highly Corrosive Env.
    
Solder Connection
    
Wire Wrap
 
 
Very High Temperature
 
 
PCB Terminal Blocks

Interface Modules
  
Electro-Mech Relay Modules
  
Relay Modules with Fuse
  
SSR Modules
  
Slim Relay Modules
  
Modular Relays
  
IDC FRC Modules
  
DSUB Modules
  
Diode & Lamp Test Modules

  
Varistor Modules
  
Fuse Modules
  
RJ45 Modules
  
Component Carrier Modules

  
Application Specific Modules
 
Accessories

Accessories   
 
Mounting Bracket
   
End Clamp/Stop
   
Mounting Rails
   
End Plate
   
Partition Plate
   
Separator Plate
   
Cross Connection Acc
   
Markers
   
Marker Plotter
   
Plotter Accessories
   
Protective Covers
   
Side Holding Plates
   
Group Marker Holder
   
Interface Modules Acc

Connectwell Tools
Sockets & Switches
New Products

 

 

Product's typical

               

Features:

Replaceable fuses with simple to operate Horizontal fuse holders.
Fast Blow & Slow Blow fuses available as standard.
Fuse ratings from 0.1 A to 6.3 A available.
Variety of Operating Voltages.
Switching Current upto 10 A at 230 VAC (or 30 VDC)
Low Coil Drive Current (4.7 mA to 100 mA)
Easy to replace pluggable relays.
Possibility of bussing (jumpering) relays in common negative or common positive configurations.
LED Indication to denote relay actuation.
Relay Coil Protection by means of a Freewheeling Diode.
Mounting options available: DIN Rail mounting & Panel mounting.
Possibility of fuse blow indication by means of a LED.
Contact Type: 1CO (SPDT) / 2CO (DPDT)

 

Connecwell VietNam

 

 

GNN VIETNAM

Headquarter Office: 153 Nguyen Van Thu, Đakao Ward, Dist.1, HCMC.

Transaction Office: 33 Hoa Hong, Ward 2, Phu Nhuan District, HCMC.

Tel : (084.8) 3 517 4923 I Fax: (084.8) 3 517 4924

Email: contact@gnnvietnam.com

Website:  www.gnnvietnam.com  l   www.gnn.com.sg

 

 

 

Số người xem : 14482
Đăng ký nhận tin