FLOWMETTERS

Universal Flow Monitors, Inc was incorporated in 1963. It is a closely held company owned and run by Erik and Lars Rosaen. This family owned business started out making variable area flow switches for the automotive market. They were used largely for lubrication flow, cooling water and paint and this remains true today.

Over the years, Universal has added flow indication and flow transmitters to the basic design platform. We have also added the Insite® and FlowStream® product lines. Insite® is a plastic see through flow indicator used for water , de-ionized water and dilute chemicals used in waste water treatment. The FlowStream® product uses a different technology to measure the mass flow of clean gasses where fast response and survivability are key.

In 1999, Universal acquired 50% of Norco Products, Inc which makes water shut off valves used in resistance welding applications.

Putting it all together, Universal and Norco (renamed Rocon) make flowmeters and controls for fluids used in high production. The products are characterized by a simple and robust design backed up by high customer service and dedication to quality.

• Cooling water flow transmitter
• Lubrication flow switch and transmitter
• Paint flow indicator and transmitter
• Inert gas mass flowmeter

• Rate
• Total
• Flow and temperature in one
• No moving parts to jam
• 4-20 mA ,switch, pulse standard
• cheaper than mags

• Costs less than most Paddle Wheels
• PVC or CPVC construction
• Ideal for water, corrosives and brine
• Solvent socket or NPT connection

• Water
• Compressed air
• Dilute chemicals used in municipal water treatment
• Ultrapure water

• Pulse out or rate
• No "hang-ups"
• Air flow over range no problem
• 1 1/2 % accurate
• Optional display
• Bolt-on design

• 1/4 - 3/4 inch
• LCD display
• Curent, voltage or pulse out
• Intrinsic safety option
• Rapid response

• Local indication of flow rate.
• Cost-effective alarm switches
• Cost-effective transmitter
• Low maintenance requirements.

• PVC, Polsulfone or Tefzel
• Visual flow indication
• NPT or Van Stone flanges
• Micro-switch or transmitter output

• Reliable mass flow technology
• Milliamp and pulse outputs
• Available 2-6 inches
• No calibration or setup required

• High-quality ruby bearings for excellent low-flow performance and long life
• One easily-replaced moving part

• No moving parts to wear out
• Dedicated fittings for simplicity
• Simple pulse train output

• Plastic-bodied mag meter
• 1/4 inch 0.60 - 60 GPH
• 3/8 inch 1.2 - 180 GPH
• 1/2 inch 2.4 - 600 GPH

• Cooling tower chemical control
• Industrial water treatment
• Deduct metering
• Meters use multi-jet design.

• These versatile impeller flowmeters in 3/8" to 1" nominal
• pipe size employ jewel bearings for very low minimum