Baumer IVO

-- 1/21/2010
:

Encoders

Product	Resolution max.	Shaft	Housing	Features
G 080 Incremental encoders	0.2...15	ø7 mm (sinter bronze slide bearing)	ø73 mm	Contact encoder
G 305 Incremental encoders	5...120	ø7 mm single / dual shaft	62.5 x 70 mm	Surface mount housing
G0355 Incremental encoders	6000...80000	ø10 mm	ø58 mm	High resolutions
G0356 Incremental encoders	6000...80000	ø6 mm	ø58 mm	High resolutions
G0AMH Absolute encoders	ST 8192 / 13 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	CANopen DeviceNet Profibus
G0M2H - SSI Absolute encoders	ST 16384 / 14 bit MT 4096 / 12 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	Diagnostic functions
G0MMH Absolute encoders	ST 8192 / 13 bit MT 65536 / 16 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	CANopen DeviceNet Profibus
G0P5H - CANopen Absolute encoders	ST 8192 / 13 bit MT 65536 / 16 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	CANopen LED status display
G1I0H Incremental encoders	5...16384	ø20 mm hollow shaft ø25 mm hollow shaft ø25.4 mm hollow shaft	ø75 mm	Large hollow shaft
G1I0S Incremental encoders	5...16384	ø20 mm end shaft ø25 mm end shaft	ø75 mm	Large end shaft

Process displays

Product	Function	Measuring principle	Number of digits / height	Features
ISI36 Tachometer electronic	Tachometer Frequence display	Gate time measurement 1 s	8-digits 8 mm	Count frequency max. 12 kHz
PCD41 Process displays electronic	Digital display of 1 analogue measured value		6-digits 14 mm	Offset for measured values 2 limits with relay Serial interfaces
PCD45 Process displays electronic	Digital display of 2 analogue measured values Peak value memory (slave pointer)		6-digits 14 mm	Ratio display for 2 analogue values 3 analogue outputs
TA134 Tachometer electronic	Tachometer	Period duration measurement	6-digits 7 mm 4 mm (count)	2 limits Measuring units 1/h, 1/min, 1/s Scaling factor Interface RS485
TA200 Tachometer electronic	Tachometer	Period duration measurement	6-digits 14 mm	Count frequency max. 40 kHz Measuring units 1/h, 1/min, 1/s Scaling factor
TA201 Tachometer electronic	Tachometer for 2 measured values and calculator function	Period duration measurement	6-digits 14 mm	Count frequency max. 40 kHz Ratio display
TA202 Tachometer electronic	Tachometer, ratio display	Period duration measurement	6-digits 14 mm	2 limits Count frequency max. 40 kHz Ratio display Analogue output Serial interfaces

Actuator/positioning drives

Product	Mechanical specifications	Electronic specifications
ASMIR Motors	Power tool with infrared interface	Motive format alignment AccuDrive
BG440 Motors	EC-motor with planetary gear unit	for automated spindle positioning cycles
BG650 Motors	EC-motor with planetary gear unit	for automated spindle positioning cycles
GK473 Gateway	Fieldbus interface for spindle position displays	CANopen, DeviceNet, Profibus-DP
N 140 Spindle position displays	Hollow shaft max. ø25 mm, manual format alignment	Display LCD two lines, interface RS485
N 141 Spindle position displays	Hollow shaft max. ø25 mm, manual format alignment with actual value correction	Display LCD two lines, interface RS485
N 142 Spindle position displays	Hollow shaft max. ø25 mm, automated format alignment	Display LCD two lines, interface RS485
N 143 Spindle position displays	Hollow shaft max. ø14 mm, with infrared interface	Format alignment by power tool, interface RS485
N 150 Spindle position displays	Hollow shaft max. ø14 mm, manual format alignment	Display LCD two lines, interface RS485
N 152 Spindle position displays	Hollow shaft max. ø14 mm, automated format alignment	Display LCD two lines, interface RS485

Counters

Product	Voltage supply	Housing	Features
B 148 Time and hours meters	24 VAC, 110 VAC, 220..240 VAC (50/60 Hz)	Built-in housing Surface mount housing	DIN dimensions
B 160 Time and hours meters	24/230 VAC ±10 % (50 Hz) 110 VAC ±10 % (60 Hz) 10...80 VDC	Built-in housing	DIN dimensions
BE134 Time and hours meters	22...50 VAC (50/60 Hz) 85...265 VAC (50/60 Hz) 12...30 VDC	Built-in housing	2 preset 4 time ranges Interface RS485
F 102 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Mini series 32 x 21.5 mm Screw mount
F 112 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Mini series 32 x 21.5 mm Screw mount
F 122 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Mini series 32 x 21.5 mm Spring clip
F 304 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Socket box	Module 50 x 25 mm Socket box
F 314 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Module 50 x 25 mm Screw mount
F 324 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Module 50 x 25 mm Spring clip
F 364 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Module 50 x 25 mm Screw mount

Inclination sensors

Product	Resolution max.	Housing	Features
GNAMG Inclination sensors	0.01..1 ° (measuring range 15°) 0.1..1 ° (measuring range 30°)	Mounting plate with bus cover	CANopen Profibus Interface

Magnetic field sensors

Product	Output circuit	Interpolation	Features
GCI0K.0101200 Magnetic field sensors - rotative	2-channel push-pull	8-fold	8...30 VDC 160 kHz
GCI0K.0201200 Magnetic field sensors - rotative	2-channel RS422	8-fold	5 VDC 160 kHz
GCI0K.0211200 Magnetic field sensors - rotative	3-channel RS422	10-fold	5 VDC 160 kHz
GCI0K.0221200 Magnetic field sensors - rotative	2-channel RS422	2-fold	5 VDC 160 kHz
GCI0K.0311200 Magnetic field sensors - rotative	3-channel push-pull	16-fold	8...30 VDC 160 kHz
GCI0K.0411200 Magnetic field sensors - rotative	3-channel RS422	16-fold	5 VDC 3.2 MHz
GCI0K.0501200 Magnetic field sensors - rotative	2-channel push-pull	10-fold	8...28 VDC 3.2 MHz
GCI0L.0220201 Magnetic field sensors - linear	4-channel RS422	8-fold	5 VDC 160 kHz
GCI0L.0220202 Magnetic field sensors - linear	4-channel RS422	16-fold	5 VDC 3.2 MHz
GCI0L.0600201 Magnetic field sensors - linear	2-channel push-pull	8-fold	8...30 VDC 160 kHz

Cable-pull assembly

Product	Length	Distance/revolution	Features
Cable-pull (3000 mm)	3000 mm	260.09 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (5000 mm)	5000 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (7500 mm)	7500 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (10000 mm)	10000 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (15000 mm)	15000 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (30000 mm)	30000 mm	500 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (40000 mm)	40000 mm	500 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (50000 mm)	50000 mm	500 mm	Incremental encoder Absolute encoder Fieldbus interfaces

Accessories

Product	Description
MR211.04A Measuring wheels	Circumf. 20 cm, knurled aluminium
MR241.04D Measuring wheels	Circumf. 20 cm, smooth Hytrel TPE-E
MR261.04A Measuring wheels	Circumf. 20 cm, knopped rubber NBR Nitril
MR291.04D Measuring wheels	Circumf. 20 cm, grooved Hytrel TPE-E
MR512.07A Measuring wheels	Circumf. 50 cm, knurled aluminium
MR542.07D Measuring wheels	Circumf. 50 cm, smooth Hytrel TPE-E
MR552.07A Measuring wheels	Circumf. 50 cm, smooth Vulkollan PUR
MR562.07A Measuring wheels	Circumf. 50 cm, knopped rubber NBR Nitril
MR592.07D Measuring wheels	Circumf. 50 cm, grooved Hytrel TPE-E
Z 001.05A Front panels	Blind front panel 48 x 48 mm

BAUMERIVO VIET NAM

Số người xem : 15138

Các bài viết khác

Newall Eclectroics, Inc.

1/27/2010
Newall Measurement Systems, Ltd. was founded in 1968 in Peterborough, United Kingdom. Since that time Newall has dedicated itself to providing the machine tool and other machinery and production industries with leading edge technologies that increase productivity and machine tool efficiency.

Crydom Inc.,

1/26/2010
Because of our dedication to quality, most Crydom products are approved by UL, CSA, VDE and TUV; and carry the CE mark signifying conformance with European directives. Some of our relays carry UL 508A SCCR ratings, proof of exceptional levels of performance and safety.

Systron Donner Inertial

1/26/2010
Systron Donner Inertial (SDI) is the world’s leading supplier of Quartz MEMS Inertial Sensing Products and Systems providing precision systems solutions to aerospace, military and commercial aircraft, marine and land vehicular applications. Our products and systems are ideally suited for use by Integrators and OEMs.

Kavlico, Moorpark, CA

1/26/2010
Kavlico is a leading North American and European manufacturer of OEM and off-the-shelf pressure, position (LVDT & RVDT), force, and other specialty sensors and transducers for the Transportation (including Automotive and On & Off-highway), Industrial (including HVAC, medical, wastewater, process control and other general industry applications) and Aerospace & Defense markets worldwide.

CROUZET

1/26/2010
Crouzet is a leading manufacturer of automation control components, serving the industry, aerospace and transport industries worldwide..

Deublin Company

1/26/2010
Deublin Company is the leading manufacturer of Rotating Unions - a mechanical device that allows transfer of pressurized fluid from a stationary source into rotating machinery for heating, cooling or transfer of fluid power

NIDEC CORPORATION

1/26/2010
It was back in 1973 that I established Nidec with the goal of becoming number 1 in the World together with my three colleagues. I had been researching precision motors ever since my school days and I made this the focus of the company. This was the start of Nidec, a company of just four engineers, including myself

Gefran S.p.A

1/25/2010
Thirty years of experience, an extensive know how, a structure oriented to customer needs, and continued investment in R&D, make Gefran a leader in the field of systems and components for automation of industrial processes.

Adolf Schnorr GmbH + Co. KG

1/22/2010
Adolf Schnorr GmbH + Co. KG is a modern, medium-sized company located in Sindelfingen (State of Baden-Württemberg).

Mikrosen Control Devices Pvt. Limited

1/21/2010
Our wide range of sensors and control equipments drives various industries for process control and productivity improvement.

Baumer thaiheim

1/21/2010
How to keep your »cool« when the going gets hot. ITD 61 A 4 Y 9 hollow-shaft encoders. Water-cooled. In a hot environment, it is essential to provide temperature-sensitive electronic components in encoders with thermal protection if you want to keep system availability high.

Baumer Hübner

1/21/2010
Encoders from Baumer Hübner are designed to steadily function even in the toughest environments. They are successfully operating since many decades in various fields of demanding industries. Still there are some applications where trust in technology is simply not enough.

Baumer Gluing Systems

1/21/2010
For more than 20 years hhs has become well-known for its ability to analyze a need and apply its experience and knowledge base to arrive at a well-targeted, safe and quick solution for mechanical adhesion challenges.

Baumer Vision Technologies

1/21/2010
Identifying, inspecting, measuring, recording – automated image processing is increasingly found in many areas of industrial production. Baumer is today one of the pioneers and leading companies in the field of industrial image processing, both for high quality image capturing components and complete systems for quality control.

Baumer Process Instrumentation

1/21/2010
Since 2007 the former Bourdon-Haenni Group operates as Baumer in the market.

Baumer Motion Control

1/21/2010
At Baumer you will find everything you need to put your task in the field of measured value acquisition in rotary motion systems into practice - from encoders featuring the appropriate data acquisition method and data output to systems for combined measuring operations.

Baumer Sensor Solutions

1/21/2010
Whether for object or position recognition, measuring, a miniaturized or exceptionally robust design – Baumer has the right sensor for every application

The Baumer Group

1/21/2010
The Baumer Group has its headquarters in Frauenfeld (Switzerland) and employs around 2000 people worldwide, with 35 locations in 18 countries. In the past decades Baumer has established an impressive reputation as a supplier of innovative and high class quality sensor products for applications in factory and process automation.

Lion Precision

1/21/2010
Dr. Kurt Lion of M.I.T. started Lion Precision in 1958 to provide capacitive sensing solutions to industry. Over the years, our pursuit of solutions has resulted in unique application specific products. In most cases, these products had a powerful and lasting impact on the industry they served.

Tamagawa seiki co.,ltd.

1/21/2010
We strive to become more environment-friendly, to become an enterprise worthy of ever-greater trust by our customers.

<< Trở về trang trước

Đăng ký nhận tin

THÔNG TIN LIÊN HỆ

CTY TNHH MTV THƯƠNG MẠI - DỊCH VỤ GIA NGUYỄN NGUYỄN

Trụ sở chính: Tầng 3, Tòa nhà Thanh Long, Số 456 Xô Viết Nghệ Tĩnh, Phường 25, Quận Bình Thạnh, TP. Hồ Chí Minh
Văn phòng Giao dịch: 01 Hoa Trà, Phường 7, Q. Phú Nhuận, TP.HCM.
Email: contact@gnnvietnam.com
Điện Thoại: +84 28 3517 4923 - Fax: +84 28 3517 4924

Theo dõi chúng tôi

VỊ TRÍ