Baumer IVO

-- 1/21/2010

Encoders

Product	Resolution max.	Shaft	Housing	Features
G 080 Incremental encoders	0.2...15	ø7 mm (sinter bronze slide bearing)	ø73 mm	Contact encoder
G 305 Incremental encoders	5...120	ø7 mm single / dual shaft	62.5 x 70 mm	Surface mount housing
G0355 Incremental encoders	6000...80000	ø10 mm	ø58 mm	High resolutions
G0356 Incremental encoders	6000...80000	ø6 mm	ø58 mm	High resolutions
G0AMH Absolute encoders	ST 8192 / 13 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	CANopen DeviceNet Profibus
G0M2H - SSI Absolute encoders	ST 16384 / 14 bit MT 4096 / 12 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	Diagnostic functions
G0MMH Absolute encoders	ST 8192 / 13 bit MT 65536 / 16 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	CANopen DeviceNet Profibus
G0P5H - CANopen Absolute encoders	ST 8192 / 13 bit MT 65536 / 16 bit	ø12 mm hollow shaft ø14 mm hollow shaft	ø58 mm	CANopen LED status display
G1I0H Incremental encoders	5...16384	ø20 mm hollow shaft ø25 mm hollow shaft ø25.4 mm hollow shaft	ø75 mm	Large hollow shaft
G1I0S Incremental encoders	5...16384	ø20 mm end shaft ø25 mm end shaft	ø75 mm	Large end shaft

Process displays

Product	Function	Measuring principle	Number of digits / height	Features
ISI36 Tachometer electronic	Tachometer Frequence display	Gate time measurement 1 s	8-digits 8 mm	Count frequency max. 12 kHz
PCD41 Process displays electronic	Digital display of 1 analogue measured value		6-digits 14 mm	Offset for measured values 2 limits with relay Serial interfaces
PCD45 Process displays electronic	Digital display of 2 analogue measured values Peak value memory (slave pointer)		6-digits 14 mm	Ratio display for 2 analogue values 3 analogue outputs
TA134 Tachometer electronic	Tachometer	Period duration measurement	6-digits 7 mm 4 mm (count)	2 limits Measuring units 1/h, 1/min, 1/s Scaling factor Interface RS485
TA200 Tachometer electronic	Tachometer	Period duration measurement	6-digits 14 mm	Count frequency max. 40 kHz Measuring units 1/h, 1/min, 1/s Scaling factor
TA201 Tachometer electronic	Tachometer for 2 measured values and calculator function	Period duration measurement	6-digits 14 mm	Count frequency max. 40 kHz Ratio display
TA202 Tachometer electronic	Tachometer, ratio display	Period duration measurement	6-digits 14 mm	2 limits Count frequency max. 40 kHz Ratio display Analogue output Serial interfaces

Actuator/positioning drives

Product	Mechanical specifications	Electronic specifications
ASMIR Motors	Power tool with infrared interface	Motive format alignment AccuDrive
BG440 Motors	EC-motor with planetary gear unit	for automated spindle positioning cycles
BG650 Motors	EC-motor with planetary gear unit	for automated spindle positioning cycles
GK473 Gateway	Fieldbus interface for spindle position displays	CANopen, DeviceNet, Profibus-DP
N 140 Spindle position displays	Hollow shaft max. ø25 mm, manual format alignment	Display LCD two lines, interface RS485
N 141 Spindle position displays	Hollow shaft max. ø25 mm, manual format alignment with actual value correction	Display LCD two lines, interface RS485
N 142 Spindle position displays	Hollow shaft max. ø25 mm, automated format alignment	Display LCD two lines, interface RS485
N 143 Spindle position displays	Hollow shaft max. ø14 mm, with infrared interface	Format alignment by power tool, interface RS485
N 150 Spindle position displays	Hollow shaft max. ø14 mm, manual format alignment	Display LCD two lines, interface RS485
N 152 Spindle position displays	Hollow shaft max. ø14 mm, automated format alignment	Display LCD two lines, interface RS485

Counters

Product	Voltage supply	Housing	Features
B 148 Time and hours meters	24 VAC, 110 VAC, 220..240 VAC (50/60 Hz)	Built-in housing Surface mount housing	DIN dimensions
B 160 Time and hours meters	24/230 VAC ±10 % (50 Hz) 110 VAC ±10 % (60 Hz) 10...80 VDC	Built-in housing	DIN dimensions
BE134 Time and hours meters	22...50 VAC (50/60 Hz) 85...265 VAC (50/60 Hz) 12...30 VDC	Built-in housing	2 preset 4 time ranges Interface RS485
F 102 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Mini series 32 x 21.5 mm Screw mount
F 112 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Mini series 32 x 21.5 mm Screw mount
F 122 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Mini series 32 x 21.5 mm Spring clip
F 304 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Socket box	Module 50 x 25 mm Socket box
F 314 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Module 50 x 25 mm Screw mount
F 324 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Module 50 x 25 mm Spring clip
F 364 Totalizers	24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 %	Built-in housing	Module 50 x 25 mm Screw mount

Inclination sensors

Product	Resolution max.	Housing	Features
GNAMG Inclination sensors	0.01..1 ° (measuring range 15°) 0.1..1 ° (measuring range 30°)	Mounting plate with bus cover	CANopen Profibus Interface

Magnetic field sensors

Product	Output circuit	Interpolation	Features
GCI0K.0101200 Magnetic field sensors - rotative	2-channel push-pull	8-fold	8...30 VDC 160 kHz
GCI0K.0201200 Magnetic field sensors - rotative	2-channel RS422	8-fold	5 VDC 160 kHz
GCI0K.0211200 Magnetic field sensors - rotative	3-channel RS422	10-fold	5 VDC 160 kHz
GCI0K.0221200 Magnetic field sensors - rotative	2-channel RS422	2-fold	5 VDC 160 kHz
GCI0K.0311200 Magnetic field sensors - rotative	3-channel push-pull	16-fold	8...30 VDC 160 kHz
GCI0K.0411200 Magnetic field sensors - rotative	3-channel RS422	16-fold	5 VDC 3.2 MHz
GCI0K.0501200 Magnetic field sensors - rotative	2-channel push-pull	10-fold	8...28 VDC 3.2 MHz
GCI0L.0220201 Magnetic field sensors - linear	4-channel RS422	8-fold	5 VDC 160 kHz
GCI0L.0220202 Magnetic field sensors - linear	4-channel RS422	16-fold	5 VDC 3.2 MHz
GCI0L.0600201 Magnetic field sensors - linear	2-channel push-pull	8-fold	8...30 VDC 160 kHz

Cable-pull assembly

Product	Length	Distance/revolution	Features
Cable-pull (3000 mm)	3000 mm	260.09 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (5000 mm)	5000 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (7500 mm)	7500 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (10000 mm)	10000 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (15000 mm)	15000 mm	315.07 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (30000 mm)	30000 mm	500 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (40000 mm)	40000 mm	500 mm	Incremental encoder Absolute encoder Fieldbus interfaces
Cable-pull (50000 mm)	50000 mm	500 mm	Incremental encoder Absolute encoder Fieldbus interfaces

Accessories

Product	Description
MR211.04A Measuring wheels	Circumf. 20 cm, knurled aluminium
MR241.04D Measuring wheels	Circumf. 20 cm, smooth Hytrel TPE-E
MR261.04A Measuring wheels	Circumf. 20 cm, knopped rubber NBR Nitril
MR291.04D Measuring wheels	Circumf. 20 cm, grooved Hytrel TPE-E
MR512.07A Measuring wheels	Circumf. 50 cm, knurled aluminium
MR542.07D Measuring wheels	Circumf. 50 cm, smooth Hytrel TPE-E
MR552.07A Measuring wheels	Circumf. 50 cm, smooth Vulkollan PUR
MR562.07A Measuring wheels	Circumf. 50 cm, knopped rubber NBR Nitril
MR592.07D Measuring wheels	Circumf. 50 cm, grooved Hytrel TPE-E
Z 001.05A Front panels	Blind front panel 48 x 48 mm

BAUMERIVO VIET NAM

Số người xem : 15141

Các bài viết khác

Mikrosen Control Devices Pvt. Limited

Baumer Process Instrumentation

Tamagawa seiki co.,ltd.

<< Trở về trang trước

Đăng ký nhận tin

THÔNG TIN LIÊN HỆ

CTY TNHH MTV THƯƠNG MẠI - DỊCH VỤ GIA NGUYỄN NGUYỄN

Trụ sở chính: Tầng 3, Tòa nhà Thanh Long, Số 456 Xô Viết Nghệ Tĩnh, Phường 25, Quận Bình Thạnh, TP. Hồ Chí Minh
Văn phòng Giao dịch: 01 Hoa Trà, Phường 7, Q. Phú Nhuận, TP.HCM.
Email: contact@gnnvietnam.com
Điện Thoại: +84 28 3517 4923 - Fax: +84 28 3517 4924

Theo dõi chúng tôi

VỊ TRÍ

Baumer IVO

Newall Eclectroics, Inc.

Crydom Inc.,

Systron Donner Inertial

Kavlico, Moorpark, CA

CROUZET

Deublin Company

NIDEC CORPORATION

Gefran S.p.A

Adolf Schnorr GmbH + Co. KG

Mikrosen Control Devices Pvt. Limited

Baumer thaiheim

Baumer Hübner

Baumer Gluing Systems

Baumer Vision Technologies

Baumer Process Instrumentation

Baumer Motion Control

Baumer Sensor Solutions

The Baumer Group

Lion Precision

Tamagawa seiki co.,ltd.

CTY TNHH MTV THƯƠNG MẠI - DỊCH VỤ GIA NGUYỄN NGUYỄN